2 min. reading time

Contact  Managing Director Thomas Efsen 

+45 26 71 00 50

thomas@efsen.dk

UV Curing Chamber

With Vela Minicure 3D™ for Medical Devices Assembly

  • 3D UV light source in the UV curing oven
  • The 3D UV chamber irradiates 3D objects with very high uniformity
  • Provides a higher level of process safety and end-product quality

Let’s introduce you to Vela Minicure 3D™

The benefits of the 3D UV curing chamber for Medical Devices Assembly

No rotation of parts required. This enables a secure, stable and uniform result.

100% Operator safety during expose since the Vela chamber contains the UV light inside the chamber.

Cures complex shapes with difficult-to-reach areas and several parts can be cured in one batch.

Less heat on product, so your heat sensitive parts remain cool and safe during cure.

Increases production yield since you can run multiple devices in one run – high capacity and more uptime.

Ultimate process stability in your production with continuous Dose Control.

Increases the product quality, provides lower surface tension and removes the risk of errors.

Cures any know UV curable adhesive and coating from big suppliers like Loctite, Dymax, etc.

What the 3D UV curing technology does

The unique box reflects UV light from any light source in all directions and this creates a homogeneous irradiation of complex as well as simple parts.

3D UV curing Vela MiniCure 3D chamber_3D photo-induction chamber_UV cure_UV light source_Vela Technologies

1. Any light source

Works with any UltraViolet (UV) and UV LED light source who enters the VelaCure 3D curing chamber.

3D UV curing Vela MiniCure 3D chamber_3D photo-induction chamber_UV cure_Vela Technologies_UV light source

2. 3D exposure geometry in the chamber

All UV rays come from diffuse reflections off the chamber walls and all part surfaces are treated and cured simultaneously.

3D UV curing Vela MiniCure 3D chamber_3D photo-induction chamber_Vela Technologies_UV cure_UV light source

3. Even uniformity with 3D curing

The 3D curing technology is energy efficient and cost-effective. It provides a higher level of process safety and end-product quality.

30 years of experience is your benefit

EFSEN UV & EB TECHNOLOGY are your specialist in radiation technology in the fields of Ultraviolet (UV) curing using UV light and Electron Beam (EB) curing using accelerated electrons.

We represent Vela Technologies in Europe. We have demo equipment available for test at EFSEN (Copenhagen, Denmark) or on site. It is easy to scale up from R&D to production with our Vela solutions.

The UV curing chamber provides a consistent cure and a finished coating with better properties. Let’s start the dialogue today.

Please contact us for further info

efsen@efsen.dk // +45 45 65 02 60