Explore ICAD™ at Allnex Customer Seminar Sept. 24-25th

Get a demonstration of ICAD™ at EFSEN’s booth during the Allnex Customer Seminar

Our application engineer David Ivarsson will be available in the Poster Exhibition Hall at the Drogenbos plant during the second day (the 25th September), promoting our ground breaking ICAD™ solution for in-line monitoring of UV and UV LED systems. The ICAD™ solution is included in our integrated LED systems, W-LED for the wood industry and P-LED for the printing industry, ensuring a solution with the best UV LED process control in the market! ICAD™ is unique in that it is the only method to measure the actual output, in real time during production, to tell you what will really reach the substrate.

Ensure your LED formulations has got what it takes

Now with a solid competence in formulation of LED coatings and with experience of ink formulations, EFSEN can help assess production lines to identify how to best transition from conventional UV to modern LED technology. The insight into the constraints and the possibilities of formulations for LED applications, and the ability to clearing misconceptions of the technology helps us to bridge the gap between chemistry and curing equipment, ensuring a smooth transition from conventional UV to UV-LED.

Our ambition is to be able to assist the end user to clear any obstacles, so they can reap the full benefits of the LED technology from day one and continue to do so throughout the long lifetime of the light source.

In practice, this can be done by optimizing the choice of light source, which has been EFSEN’s area of expertise for a long time, and we can now offer formulation consultation, to fine-tune the formulation itself. Practical experience and good relationships with raw material suppliers like Allnex means we can quickly find the components that will be a good fit for your application.

If you are unable to attend, please contact us to evaluate how you could benefit of the ICAD™ Technology. Contact David Ivarsson here.

We hope to see you at Allnex Customer Seminar!

 

Allnex Customer Seminar 2018_efsen_icad technology_david

Get an exceptional demonstration of the superior 3D UV Curing Technology at Medical Technology Ireland in Sept. 26-27th

Meet us at booth no. 3 for a dialogue on how your company’s Vela Technology solution would be.

For the second time in row we are happy to announce, that Efsen UV & EB Technology will be demonstrating the three-dimensional UV curing technology from Vela Technologies at the only med-tech Exhibition and Conference, Medical Technology Ireland in September 26th and 27th.

Our technical specialists will tell you more about the technology from Vela and how it’s ideal for UV bonding and UV curing of three-dimensional products as medical devices, microelectronics and 3D printed solutions. Vela Technology creates a uniform cure on all surfaces 360 degrees around the product. It’s provides a more consistent cure and finished coating with better properties, such as adhesion, hardness and gloss.

The Dose-Control software enables users to document the exposure all the way down to each product manufactured. The medical devices assembly market has already adopted this technology very well, and we are currently seeing a lot of interest from microelectronics assembly and post cure of 3D printed materials.

Read more about the med-tech Exhibition and Conference here.

If you are unable to attend, please contact us to evaluate how you could benefit from this Vela Technology. Contact us here.

 

We hope to see you at booth no. 3 in September!

MiniCure Chamber with Part inside_efsen engineering

Vela 6UP with catheters_efsen engineering

Efsen at Ligna 2017

efsen-ligna-2017_2

At Ligna 2017, Efsen will be demonstrating the new 2017 W-LED by Efsen.

This unit brings user-friendlines and performance of wood curing to a new level. The LED you can install by yourself - just connect power cable and line signal and you are ready to produce with the benefits of LED from Efsen.

This new W-LED also comes with the newly developed ACI technology from Efsen, which allows constant monitoring of its UV LEDs.

 

W-LED-land

 

At Ligna you can also hear more about our WoodCure UV lamp, the new EIT measuring devices and what UV powder can bring benefits to the wood and furniture industry.

Please click here to learn more and register

We hope to see you at Hall 17, Stand C79

Efsen Engineering at Medtec Europe, 4-6 April at Messe Stuttgart, Germany

medtec-europe-logo

At Medtec Europe, Efsen Engineering - UV, UV-LED & EB Technology will be demonstrating the new 3 dimensional UV curing technology (A New Way of UV Curing) from Vela Technologies.

Vela technology is ideal for UV bonding and UV curing of three-dimensional products as medical devices, microelectronics and 3D printed solutions. Vela Technology creates a uniform cure on all surfaces 360 degrees around the product. The Dose-Control software enables users to document the exposure all the way down to each product manufactured. The medical devices assembly market has already adopted this technology very well, and we are currently seeing a lot of interest from microelectronics assembly and post cure of 3D printed materials.

 

Please click here to learn more and register

 

We hope to see you at booth 1F40